WES+

WES+ Products

Since its introduction, the WES wireless alarm system has become recognised as the system of choice for the UK construction top 50, due to its ease of use, system reliability and the highest level of third-party certification. WES+ remains the only wireless fire alarm system for construction that complies with EN54 part 25.

WES+ is engineered to meet the harmonised fire detection and alarm systems standard EN54, and therefore meets the requirements of the Construction Products Regulation. WES+ sets the safety standard for construction site evacuations.

 

Practical design

WES+ is an inherently safe, practical solution for construction sites. Because it’s wireless and battery powered there’s no need for networks of cabling that could be trip hazards or could cause issues as sites change and grow. You’ll also find that operating a wireless system significantly reduces the cost and time of installation – units can easily be moved around the site as required and can be re-used on other projects.

 

High Performance

When it comes to safety systems, reliability and performance are vital, so we’ve made sure that WES+ is designed and manufactured in the UK to ISO9001 quality standards and using the best components. To make sure we delivered the best possible system, we worked directly with two leading UK construction companies in the development of WES+.

WES+ units are fitted with Category 1 wireless receivers, which are the highest level, most reliable wireless receivers on the market – they’re specifically recommended for use in systems protecting human life.

  • High Performance. The system uses best quality Category 1, Euro-harmonised radio in compliance with European standards covering the use of radio technology in emergency equipment (ETSI 300-220-1)
  • Cost-effective. There’s no wiring, so no need for specialist installation.
  • Battery life tested for 3+ years. Keep your replacement costs and waste to a minimum.
  • Practical. You can have an unlimited number of units on one site, quickly add and remove units as the build progresses and re-use WES+ units on future projects.
  • Dedicated helpline & training. Fully supported
  • Reliable. WES+ is independently tested, CE marked and compliant with all key safety legislation.
  • Suitable for European use. WES+ uses a Europe-compatible radio frequency, and is fully compliant with the European Construction Products Regulation so you can now use it on your European sites.

 

WES+ meets vital fire safety legislation

  • EN54 and the Construction Products Regulation
  • HSE Fire Regulations for Construction sites (HSG168)
  • European Standards covering the use of Radio technology in emergency equipment (ETSI 300-220-1)
  • Fire Protection Association Joint Code of Practice
  • Structural Timber Association Guidelines
  • BS5839 – WES+ can be installed to BS5839, enabling use in temporary accommodation units

 

WES+ APP

The WES+ app for Android tablets delivers full wireless fire alarm system reporting as well as flexible system configuration.

The WES+ app is our free app available to download from Google Play. The App allows users to connect directly to the WES+ network via the WES+ Base station (USB cable required) Features include access to system logs, detailed unit information, full installation users’ manuals and SIM/GSM settings (on GSM enabled units). Requires Android 4.2 Jellybean or later to run.

  • View individual unit and system-wide alerts, including tamper warnings, battery drain, wireless signal performance and more
  • View full system logs, including unit activations, unit tampers, and silent test activations.
  • Health and safety reporting made easy – export your system logs and weekly silent test logs to pdf, csv or email.
  • Configure site name and unit numbering through a simple tablet interface
  • Convenient configuration of SMS recipient details
  • Quick quote request form for new units and consumables
  • Browse the WES+ user manual and troubleshooting guide straight from the app

Contact us for more information.

 

Download the App from the Google Play store now.

Fire Safety
and EN54

Water Street,
Manchester

Schierstein Bridge,
Germany

WES3 Base Station
The WES fire alarm system Base Station delivers extensive system reporting and configuration functionality for the fire alarm system across your construction site.
It’s wireless and battery powered, so there’s no need for an inflexible fixed, wired control panel – the Base Station has all the reporting functionality you need combined with the mobility and reusability of the rest of the WES product range.
  • includes programming functions, so you can edit site name and SMS numbers directly from your Base Station.
  • System Log records activations and warnings, so you can monitor activity and history across your whole WES system
  • GSM version available, enabling up to 6 users to receive configurable SMS notifications of alarm, tamper or system faults.
  • Access code protection of all system settings and alarm reset for maximum accountability
  • Unit numbering, enabling easy identification of activated units directly from the base station
  • Recent events logged in memory for Health and Safety audit procedures
  • 3-year Battery life, tested under normal usage conditions, reducing lifetime costs and need for constant replacement.
Fire Alarm Call Point
The Fire Alarm Call Point from WES+ is the primary alert unit in the WES+ wireless emergency system range.
The unit incorporates fire alarm sounder, optional strobe alert, and a manual call point for activating the alarm.
Affix units around the site in accordance with your fire plan and they will create a completely secure mesh network, forming a site-wide alarm that can be manually triggered from any call point.
  • Integrated siren and manual call point
  • Optional built-in strobe for high visibility
  • Battery life tested to 3+ years, reducing lifetime costs and need for constant replacement and improving compliance with waste regulations
  • Add, remove and clone units in a few button presses
  • LED fault warning and troubleshooting system
  • Unit numbering to aid pinpointing of triggering unit in the event of an alarm
  • Clear visual identification of activated unit
  • Initiate a silent system test to minimise site disruption
  • Dual Tamper alerts to ensure maximum system integrity
  • Transit mode to allow safe removal and storage without any risk of activation
  • IP rating: IP55C
WES3 Call Point
The Fire Alarm Call Point from WES is the primary alert unit in the WES wireless emergency system range. The unit incorporates fire alarm sounder, optional strobe alert, and a manual call point for activating the alarm.
Affix units around the site in accordance with your fire plan and they will create a completely secure mesh network, forming a site-wide alarm that can be manually triggered from any call point.
  • Integrated siren and manual call point with optional built-in strobe for high visibility
  • Battery life tested to 3+ years, reducing lifetime costs and need for constant replacement and improving compliance with waste regulations
  • Unit numbering to aid pinpointing of triggering unit in the event of an alarm. Add, remove and clone units in a few button presses
  • Transit mode to allow safe removal and storage without any risk of activation
The WES REACT call point features a Medical Alert features which can be raised from any Call point on site. For more information on all features of WES REACT watch the WES REACT Video.
WES3 Detectors
Protect your site round the clock by adding automatic detection units to your WES fire safety solution. These battery powered detectors are easy to install, straightforward to use and can be operational within minutes.
We can supply smoke detectors, heat detectors and dust-resilient smoke detectors.
  • Detection units are silent and connect directly to the WES system to activate the fire alarm system across the site in the event of fire.
  • Minimum 3 years’ battery life, externally tested for normal usage conditions, reducing lifetime cost
  • Activated unit flashes red LED for 30 minutes after activation to enable easy identification
  • Ceiling mounted and suitable for internal use
  • Heat, smoke and dust resistant detector heads available
All units both send and receive radio signals, for maximum robustness of network coverage. Since detection units are incorporated into your WES network, they will they act as an early warning of fire risk to all site staff during the working day and they’ll also make sure that the site remains protected out of hours.
If you add a GSM base station, you can even make sure that security and monitoring personnel receive a text alert if the fire alarm is automatically triggered.
WES3 Interface
The WES fire alarm Interface lets you connect your WES temporary fire alarm to other systems, such as turnstiles, so that you can ensure your emergency systems are working together as efficiently as possible to protect your site.
  • Input: Connect so that the WES fire alarm system can be triggered to sound the alarm by an external system
  • Output: Connect so that the WES system going into alarm triggers an action on the part of an external system, eg auto dialler or access control
Note that the Interface cannot be connected directly to the mains current, and you will need a suitably qualified person to wire together the units.
WES3 Link Unit
The Radio Repeater Link unit is the simple, cost-effective way to extend the range of your WES temporary fire alarm system on very large-scale sites.
Simply connect to your existing WES units, set up on site and the unit will act as a relay to link geographically separated sections of the site together.
  • 3-year battery life, tested under normal operating conditions, reducing lifetime costs and need for constant replacement.
  • Anti-tamper controls to ensure system integrity and compliance
  • Transit mode to allow safe removal & storage without risk of activation
Do I need a link?
Most likely, you’ll never need a radio repeater unit for your WES system – each unit has excellent wireless range already. However, if you do receive a low signal warning, for example if a far-off fire point becomes more obscured as a build progresses and starts to lose signal, you can add a Link unit to boost the signal and make sure your fire alarm system continues to work optimally.
WES+ Base Station
The WES fire alarm system Base Station delivers extensive system reporting and configuration functionality for the fire alarm system across your construction site.
It’s wireless and battery powered, so there’s no need for an inflexible fixed, wired control panel – the Base Station has all the reporting functionality you need combined with the mobility and reusability of the rest of the WES product range.
  • Includes programming functions, so you can edit site name and SMS numbers directly from your Base Station.
  • System Log records activations and warnings, so you can monitor activity and history across your whole WES system
  • GSM version available, enabling up to 6 users to receive configurable SMS notifications of alarm, tamper or system faults.
  • Access code protection of all system settings and alarm reset for maximum accountability
  • Unit numbering, enabling easy identification of activated units directly from the base station
  • Recent events logged in memory for Health and Safety audit procedures
  • 3-year Battery life, tested under normal usage conditions, reducing lifetime costs and need for constant replacement.
WES+ Call Point
The Fire Alarm Call Point from WES is the primary alert unit in the WES wireless emergency system range. The unit incorporates fire alarm sounder, optional strobe alert, and a manual call point for activating the alarm.
Affix units around the site in accordance with your fire plan and they will create a completely secure mesh network, forming a site-wide alarm that can be manually triggered from any call point.
  • Integrated siren and manual call point with optional built-in strobe for high visibility
  • Battery life tested to 3+ years, reducing lifetime costs and need for constant replacement and improving compliance with waste regulations
  • Unit numbering to aid pinpointing of triggering unit in the event of an alarm. Add, remove and clone units in a few button presses
  • Transit mode to allow safe removal and storage without any risk of activation
WES+ Detectors
Protect your site round the clock by adding automatic detection units to your WES fire safety solution. These battery powered detectors are easy to install, straightforward to use and can be operational within minutes.
We can supply smoke detectors, heat detectors and dust-resilient smoke detectors.
  • Detection units are silent and connect directly to the WES system to activate the fire alarm system across the site in the event of fire.
  • Minimum 3 years’ battery life, externally tested for normal usage conditions, reducing lifetime cost
  • Activated unit flashes red LED for 30 minutes after activation to enable easy identification
  • Ceiling mounted and suitable for internal use
  • Heat, smoke and dust resistant detector heads available
All units both send and receive radio signals, for maximum robustness of network coverage. Since detection units are incorporated into your WES network, they will they act as an early warning of fire risk to all site staff during the working day and they’ll also make sure that the site remains protected out of hours.
If you add a GSM base station, you can even make sure that security and monitoring personnel receive a text alert if the fire alarm is automatically triggered.
WES+ Interface
The WES fire alarm Interface lets you connect your WES temporary fire alarm to other systems, such as turnstiles, so that you can ensure your emergency systems are working together as efficiently as possible to protect your site.
  • Input: Connect so that the WES fire alarm system can be triggered to sound the alarm by an external system
  • Output: Connect so that the WES system going into alarm triggers an action on the part of an external system, eg auto dialler or access control
Note that the Interface cannot be connected directly to the mains current, and you will need a suitably qualified person to wire together the units.
WES+ Link Unit
The Radio Repeater Link unit is the simple, cost-effective way to extend the range of your WES temporary fire alarm system on very large-scale sites.
Simply connect to your existing WES units, set up on site and the unit will act as a relay to link geographically separated sections of the site together.
Do I need a link?
Most likely, you’ll never need a radio repeater unit for your WES system – each unit has excellent wireless range already. However, if you do receive a low signal warning, for example if a far-off fire point becomes more obscured as a build progresses and starts to lose signal, you can add a Link unit to boost the signal and make sure your fire alarm system continues to work optimally.
  • 3-year battery life, tested under normal operating conditions, reducing lifetime costs and need for constant replacement.
  • Anti-tamper controls to ensure system integrity and compliance
  • Transit mode to allow safe removal & storage without risk of activation